WHEN YOU DEMAND HIGH QUALITY AND ACCURACY, GO WITH........ SPEED CITY !

MOPAR
FORD
MISC
PARTS
GM
DRAGSTER
 
Testimonials
Model Gallery
In Progress
Coming Soon
Model News
Order Form
Contact Us
Want's
Links
 

"MODEL GALLERY"
PAGE 2

 


 

Wayne "TEX" Darnaby's
TEMPTATION
1965 Plymouth Sedan A/FX

Built by Scott Kapellusch
Speed City Resin Model #SC-38
1965 PLYMOUTH SEDAN A/FX

Speed City Parts added:
A-100 Lightweight Super Stock Seats
Chrysler Dana 60 Rear End

AFX (low profile) Blue Streak Drag Slicks
Inner Rims (deep dish)
American Racing 15" Front Mag Wheels (with Inner Rims)
Front Leaf Spring Assortment Pack
Hemi Hilborn Injection Manifold
AFX PARTS PACK- Tachometer, Brake Cylinder,Timing Cover, Timing Balancer Pulley,
Block Out Headlight Covers(reversed), Wheelie Casters, Fuel Pump & Steering Box.
FUNNY CAR PARTS PACK- Fire Extinguisher, Transmission Linkage & Oil Filter with adapter.
BIG BLOCK CHEVY PARTS PACK- Oil Cap (used for fuel cap)
Hood Pin Decals

Modifications to resin model:
Besides making the original master for this model (shown on the "In progress" Page)...
Front wheel wells were moved reward to stock position, front of wheel well was cut out,
bottom of rear quarter panels were reshaped, new rear valence was added, licence plate was filled in,
rear valance lines were carved in. Plastic strip added to B-Pillar, front direction bumper lights cut out,
cone shaped head lights were drilled out, door handles removed, all gauges removed from dash,
gauge frame made from plastic strips, Plymouth letters on hood removed, interior tub & rear bumper discarded.

Scratch built features on build:
Radiator support, front tube straight axle, spindles, front shocks, steering rod & tie rods, throttle rod,
front axles (from small nails), down tubes on roll bars, shift lever, part of steering wheel shaft, steering rod,
tachometer mount & cable, gear shift display, fuel shut off cable, seat belts, parachute pull & cables, parachute mount,
parachute straps, parachute belts & rope, all straps & ropes painted blue, parachute release clasp,
door panels from plastic sheet and lines cut to resemble 990, door pull handles added, brake & gas pedal added to dash,
firewall panel filler plate, header collectors, Lindberg heads enlarged with plastic sheet to fit Hemi Hilborn Intake,
B-Pillar center strips added, all fuel, ignition and brake lines, inner well hood pins & all glass from clear plastic sheet.

Donor parts:
Lindberg '65 Dodge 990- Rear end, leaf springs, brake drums (cut from wheel backs), transmission mount,
front frame bar, main roll bar, firewall, inner fender panels (altered). Interior & exterior door handles.
Lindburg '65 Richard Petty Plymouth- Hemi engine, transmission, valve covers,
oil pan (deepened with sheet plastic) & door handles.
AMT/ERTL Mustang Funny Car- Injection stacks (cut down 2 scale inches).
Revell Tony Nancy 22 JR roadster dragster- Rear wheels.
MPC Color Me Gone- front tires.

Parts Box items:
large parachute & Headers (altered).

Aftermarket items:
Pro-Tech- Nut & bolt heads, detail wires, fuel lines, Pre wired Vertex Magneto, throttle linkage.
Detail Master- Belt buckles, inner hood pins.
ModelExpo red 1/64 pin stripe
Chrome Tech USA- Grill & Tail lights
Bare Metal Foil

Paint:
Body- Krylon Color Master White Lacquer & Tamiya Brilliant Blue
Chassis- Krylon satin black and rust-all treatment
Engine- Testors Hemi Engine Orange
Interior floor- "Americana" Slate Gray
Door panels, dash & Seat- Testors silver

Decals:
"Speed City"
Including "Hood Pin" decals.
Moebius Plymouth- Dash decal


 

SHIRL GREER'S
TENSION

1965 Dodge Coronet Sedan AXS Funny Car


Built by: Scott Kapellusch

Speed City Resin Model #SC-47
1965 DODGE CORONET SEDAN AFX

Speed City Parts added:
AFX Drag Slicks
Keystone Mag Wheels (coming soon)
Inner Rims (deep dish)

Goodyear Blue Streak *AFX* Skinny Front Tires
American 12 Spoke Front Mag Wheels (altered)
FUNNY CAR PARTS PACK- Oil Filter & Gauge Cluster Rack (altered).
AFX PARTS PACK- Balancer/Timing pulley, Fuel Pump, Brake Cylinder, Steering Unit, Push button transmission console (altered).

Modifications:
Besides making the original master for this model (shown on the "In progress" Page)...
Since TENSION was not a factory built A/FX, some mod's needed to be done to replicate this particular A/XS car.
The rear wheel wells were moved back 5" and the front wheel wells were moved forward 2 scale inches.
Chassis was lengthened by 2" by adding a section to the rear of the trunk floor.
The tips of the front wheel wells were removed and a lip around the bottom of the front valance made from .010 x .060.
A hole in the hood was cut out for the distributor & wires. The trunk lid was cut out and thinned.
The tail lights and housings were removed and hollowed out, door handles were removed and door handle holes were drilled.
Chrome windshield trim and rear window trim was removed and .010" strip was used to make windshield supports.
New B-Pillars and B-Pillar frame work inside the body were installed, holes in trunk valance were cut out and
2 - front quarter panel vents were made from 0.10" sheet plastic.

Scratch built features:
Windshield supports, B-pillars & frame work, trunk supports & gutters, 1/4 panel vents, roll bars,
engine bay down tubes, all steering rods, movable front spindles, entire radiator support,
aluminum firewall safety plate & throttle linkage. parachute box & supports, parachute pull & fuel shut off levers,
starter button & on-off power switch, parachute cable bracket, brake lines & fuel lines. Altered oil pan to be deep dish.
seat belts cut from ribbon, air foil, Champion spark plugs decal & ISKY decal.

Donor parts:
Lindburg '64 Dodge 330 - Engine, heads, valve covers, oil pan (altered), starter, transmission, headers,
rear leaf springs, rear shocks, firewall (altered), fender supports (altered), transmission brackets, K-member (altered).
Parts box - Gas & brake pedals, battery, fuel tank (altered), radius rods, front shocks & drive train.
MPC Mustang Gasser - Seat (cut down 6" & re-shaped with new piping added)
Revell '29 Ford Pick-up truck - Pitman arm & dropped tube axle (shortened 4 " from center)
Pro Tech - Hood Pins, Photo-etch nuts & bolts & seat belt buckles
Polar Lights F/C - Distributor & cap

Paint:
Body - Pactra #RC5502 Arcrl Metallic Blue over Silver base.
Top of roof - Customized Metallic Blue with light blue pin stripe.
Chassis - Mild weathering using "Rust-All Treatment" rust & black colors only,
and dry brushing "AMERICAN" neutral gray over high areas.
Interior - Zolatone style splatter paint was done by hand using a tooth brush with
"Americana" Black, neutral gray & white Paints.

Decals:
Fremont Racing Specialties:
A/XS letters needed to be reversed and re-angled on right side.
All A/XS letters were painted over with met. gold.
"TENSION" door decal - Red area's were brush painted over with Guards Red (to match front spoke wheels).
White & Yellow pearl powders mixed with clear were brush painted over all the "TENSION" door letters.

Woodland Scenes Dry Transfer's:
All Metallic gold "Numbers & Letters" on rear 1/4 panel.

Champion Spark Plugs Decal:
Made myself in photoshop

Speed City logo on trunk:
Made myself in photoshop

ISKY Decal:
Home made and hand painted.


 

1967 BUICK SKYLARK


Built by: Ryan Rice

Speed City Resin Model #SC-14
1967 BUICK SKYLARK G/S 400

Modifications:
Since this model was made to be a standard Skylark-
the G/S hood scoops were omitted from build, the G/S emblem was removed from the grill
.
The chrome side molding & hood spear was removed from body.
The chrome hood spear from AMT's Riviera hood was cast in resin and glued to the hood of the Speed City resin body.

Scratch built features:
Top trim and overlap strips were added to the roof (to simulate a vinyl top).
Scratch built the fender skirts, Interior Glass & antenna
.

Donor Parts:
Lindberg '67 Olds 442- Chassis, engine, interior, (modified the steering wheel column/shifter).
Lindburg '64 Plymouth- Hub caps (as they were the closet match to '67 Buick hubcaps).
Tires - The Modelhaus.

Paint:
Scale Finishes - Burgundy Mist Metallic
Vinyl top - airbrushed with unthinned Tamiya acrylic black mixed 3 to 1 flat to gloss

Bumpers & grills plated by: Chrome-Tech USA



Bill Lawton's
MYSTERY 9
1965 TASCA FORD MUSTANG AFX

Built by: Doug Schultz

Speed City Resin Model #SC-19
1965-'66 LONG NOSE MUSTANG AFX

Speed City Parts added:
*10" Injection Stacks

Halibrand (shallow dish) Rear Mag Wheels
Halibrand Front Mag Wheels (with inner rims)
Hemi Hilborn Injection Manifold (modified to fit a SOHC intake)

Modifications & scratch built features:
Front clip from the fire wall forward (including: New round tubes, engine bay aluminum sheet,
Frame sections, Torsion bar supports & Shock Towers).
Interior roll cage and all dash bracing for pedal and column mounts & headers (from plastic rod)

Donor Parts:
Parts box: Early mustang front and rear suspension, radiator and top loader transmission.
AMT Dick Brannan's  SOHC Mustang: Rear bumper
Revell Shelby Mustang GT 350H: Tail lights
AMT Super Boss Mustang funny car: Glass
Polar lights Mustang funny car: Engine

Paint:
custom mixed PPG Base coat Clear coat.

Decals:
Whoopie Kat Decals

Check out Dougs collection of Speed City Resin models


 

Jim Harwood's
WAGON MASTER

Buick Riviera 4 - Engine Dragster

Built by: Glen Skidmore

Speed City Resin Model #SC-32
RIVIERA WAGON MASTER DRAGSTER

Speed City Parts added:
Hollow Tube Injector Stacks (4 sets)
Goodyear Blue Streak 16" Slicks (2 sets)
Halibrand (deep dish) rear mag wheels

Dual Parachutes) from Parachute Assortment Pack

Donor Parts:
Revell Tommy Ivo Show Boat Dragster kit

Scratch built features:
Interior tin From Sheet Plastic, Luggage Rack Rod, Wiring/Plumbing, Headers & Push Bar.

Paint:
PAINT: CREATEX AUTO-AIR Candies over pearl white base.

Decals:
Home made..... Created in Adobe Illustrator/Photoshop and printed on Papilo Inkjet Decal paper.


 

Dick Harrell's
YENCO SUPER CAMARO
1967 Long Nose Camaro AWB Funny Car

Built by: Ron Ramsay

Speed City Resin Model #SC-16
1967 LONG NOSE CAMARO AWB FUNNY CAR

Speed City Parts added:
Buick, Olds, Pontiac Rear End
Chevy Hilborn Injection Manifold
Halibrand (deep dish) Mag Wheels
Goodyear Blue Streak 16" Slicks
Goodyear Blue Streak *Funny Car* Skinny Front Tires
Big Block Chevy Parts Pack- Timing Cover
AFX PARTS PACK- Fuel Pump, Gas Cap, Cooler Can & Wheelie Casters

Modifications to resin model:
Removed right side door handle, hollowed out interior door panels

Scratch built features:
Round tube frame rails on front clip, altered Speed City motor mount, roll bars, fuel tank bracket,
Parachute cables, steering shaft support, steering box & steering rods, straight tube axle, spindles,
tie rod, rear coil over shocks, ladder bars, wheelie bar springs, transmission mount, windows,
side window support strips, shifter handle, fuel tank, fuel lines, fuel block & linkage, water lines,
headers (made from solder), front spoiler, aluminum injector stacks & throttle linkage.

Donor parts:
R&B Motion parts used- rod ends, tubing, various bolt kits.
Parts box- Steering wheel, Cragar mag wheels
Detail Master- Hood pins
Pro-tech- Hood pins, spark plug wires

Paint:
Body: G.M. red
Interior Tin: Plasti-Coat Chrome
Engine: PlastiKote "Chevrolet Orange" engine enamel

Decals: Slixx


 

Charlie Allen's
PURPLE TERROR
1965/'66 Long Nose Dart Funny Car

Built by: Ron Ramsay

Built from 2- Speed City Resin Models:

Speed City Resin Model #SC-2
1965-'66 DODGE DART AWB FUNNY CAR


Speed City Resin Model # SC-29
1966 DART LONG NOSE AWB FUNNY CAR

Speed City Parts added:
Hemi Hilborn Injection Manifold
Goodyear Blue Streak *AFX* Skinny Front Tires

AFX PARTS PACK- Timing Cover, Balancer & Wheelie Casters

Body modifications:
Front clip was removed from the Purple Terror '65/'66 Dart -to save the body.
Front clip was removed from a '66 Long Nose Dart Funny Car to be used on this model.
Inner door panels were added to body.
Bumper was molded to front clip.
Section of hood was removed.

Scratch built features:
Round tube frame on front clip, motor mounts, roll bars, fuel tank bracket, Parachute cable,
steering box & steering rods, straight tube axle, spindles, tie rod, torsion bar suspension,
clear tinted windows, steering shaft support, fuel tank, fuel block & linkage & fuel lines.

Donor parts:
Polar Lights F/ C -Engine block, heads, valve covers, transmission, drive shaft & parachute.
R&B Motion parts used- rod ends, tubing, various bolt kits.
Parts box- Steering wheel, Cragar mag wheels,
Lindburg - Rear End, springs & shocks
Revell '68 Charger - Headers
Detail Master- Hood pins
amt - 2 piece Slicks
Parts box- Seats

Paint:
Body: Real car was painted Metallic lavender.
Mix 1 full bottle of Colors by BOYD # 52704 GRAPE PEARL with 3/4 of a bottle of Testors Silver.
Engine: Model Master Hemi Orange

Decals: Whoopie Kat


 

STONE, WOODS & COOK
DARK HORSE 2
'66 Long Nose AWB Mustang Funny Car

Built by: Ron Ramsay

Speed City Resin Model # SC-17
'66 LONG NOSE AWB MUSTANG FUNNY CAR

Modifications to resin model:
Front clip was separated from body, Interior tub was cut into 4 sections to fit onto 1-piece chassis.
the Inner Body Braces were glued to each side, honeycomb detail was removed from grill.

Speed City Parts added:
392 Hemi Engine
AFX Parts Pack- Fuel Pump
Funny Car Parts Pack- Blower Pulleys & Blower Belt.
M&H Racemaster 16" Slicks
Goodyear Blue Streak *Funny Car* Skinny Front Tires
Hood Pin Decals

Scratch built features:
Entire tube frame, motor mounts, roll bars, fuel tank bracket, battery box support, rear inner body braces, door sills,
Parachute straps (made from pillow tags), steering box & steering rods, straight tube axle, spindles, tie rod,
torsion bar suspension, coil over shocks, front clip hinge, clear windows, rear window straps,
B&M shifter box, steering shaft support, photo-etch rivets on tin work, headers (from solder), fuel tank,
fuel block & linkage, fuel lines, magneto, starter cable, brake line block, brake lines, trunk vent.
Parts Box-Cragar mag wheels and Polar Lights front wheel inner rims to make front mag wheels.
Parts box- 15" Cragar mag wheels and Monogram Troublemaker El Camino 16" outer rim,
to make 16" Cragar Rear Mag Wheels (all wheels were sent to Chrome-Tech USA for plating).

Donor parts:
Revell- Stone, Woods & Cook- original '41 Willys rear end & drive shaft
AMT '67 Shelby mustang 500- Grill bar & fog light lenses
Model Car Garage- photo-etch screen for trunk screen
Scale Motorsport- photo-etch screen for front grill
Pro-tech- seat belt kit, 0.20" bolt heads as rivets
R&B Motion- rod ends, tubing, various bolt kits.
AMT Mustang Funny Car- Rear bumper
Amt- Hemi Under Glass- Battery
Parts box- steering wheel
Detail Master- Hood pins

Paint:
Body: House of Color "Oriental Blue"
Interior Tin: Plasti-Coat Chrome

Chrome Plating:
Chrome-Tech USA- chrome plated the straight tube axle, spindles,
tie rod, torsion bar front suspension, Cragar mag wheels & Inner Rims.

Decals: Slixx
(reversed the ribbons on the front fenders)

This model won 3 category's..... BEST DETAIL, FAST ON THE QUARTER MILE & BEST IN SHOW,
at the Wally Parks N.H.R.A. Motor sports Museum "SPIRT OF SPEED" Model Contest on Nov 8 2015


 

Dick Landy's
LANDY'S DODGE
1965 Dodge Coronet AFX

Built by: Gary E. Kennedy

Speed City Resin Model # SC-35
1965 DODGE CORONET HARDTOP AFX


Donor parts:
Lindburg Ramchargers 64 Dodge 330 S/S- Seat, front suspension, rear end, inner fenders, radiator, core support and roll bar.
Revell 68 Hemi Dodge Dart - Engine and transmission.
Parts Box- Front & rear wheels, tires and wheelie casters.
Slicks and injector stacks are AMT items.
Vacuum form glass: The Modelhous

Paint:
Body - Testors Diamond Dust #1830
Interior - Testors Sand Beige #2910

Decals: Slixx


 

Pat Mahnkin & Ralph Snodgrass
PSYCHO MUSTANG
(Driven by: Larry Barker)

Built by: Scott Kapellusch

Speed City Parts added:
Direct Drive Unit
Ford 9" Rear End
Halibrand 16" Rear Mag Wheels
Goodyear Blue Streak 16" Slicks
Inner Rims (shallow dish)
American 12 Spoke 18" Mag Wheels
AFX PARTS PACK- Cone shaped head lights (reversed), gas cap & fuel pump
FUNNY CAR PARTS PACK- 4-port Injector Hat, Blower Pulleys, Oil Filter, Idler adjustment arm & Timing Cover
M/T Big Block Chevy Parts Pack- Breathers
Parachute (from Parachute Parts Pack) (extended 4")

Body modifications:
Starting with an AMT/ERTL Mustang Funny Car, the rear wheel wells flares were sand down and stock wheel wells
from an AMT 1966 Mustang hardtop were used in place. Tear drop hood scoop was re-shaped with putty to a
"spade shape" and lowered with a new sheet of plastic. Grill area filled in with sheet plastic, side vent windows-
sail panel vents and windshield wipers were removed. Cowl vents filled in, rear valance and rear bumper molded to the
body. Hood molded to body, Inner door hinge frames were added. Middle insert panel of body (before the rear wheel wells)
were re-shaped. Side window trim backing was added. Sail panel vent trim and side window trim was corrected with
.020 strip plastic . Front clip was re-scribed and separated from body.

Scratch built features:
Tube frame, motor mounts, roll bars, padding & tape. Hood supports on frame & hood, fuel tank bracket,
floor pan, steering box & steering rods, seat mount, gas pedal bracket, brake cylinder, straight tube axle,
torsion bar suspension, drive train safety tube, Fuel shut off handle, rods & pivots, Inner door bracing,
grill block out, inner door hinge panels, rear wheel well tubs, rear inner body braces, fire wall / dog house & cowl.
Clear & blue tinted "Flush mounted" windows, cowl braces, headers (from solder),
frame around windshield (black pin stripe), fuel block, brake line block, brake lines, rear window straps &
Speed City Resin Direct Drive Unit.

Donor parts:
AMT Dragster- Front tires.
Revell Ford Thunderbolt 427 engine.
Revell Miss Deal- brake pedal, gas pedal, blower & Injector scoop.
MPC Mail Box Chopper- Clutch Handle (used for parachute handle)
AMT Funny Car seat & gas tank. Protech- Magneto, Nuts & Bolts, fuel lines and white detail wire.

Paint:
Krylon Lacquer - Chrome yellow
Interior: Zolatone style splatter paint was done by hand using "Americana" Paints.

Decals: by Billygooche

This model took MUSEUM QUALITY REPLICA at the Wally Parks N.H.R.A. Motorsports Museum
"SPIRIT OF SPEED" Model Contest on Nov 8 2015


 

Hayden Proffitt's
'66 CORVAIR FUNNY CAR


Built by: Scott Kapellusch

Speed City Parts added:
Corvair Funny Car- F&R Bumpers & Grill (mid section)
Square Tube Funny car chassis- (heavily modified)
Enderle Injection Manifold (w/Ram Tubes)
M&H Pie Crust 15" Slicks
*Super Stock* Skinny Front Racing Tires
Halibrand 12 Spoke Front Mag Wheels
Eaton G.M. 14 Bolt Rear End
Parachute (from Parachute Parts Pack)
Front Leaf Spring Assortment Pack- Front Leaf Springs
Rear Suspension Assortment Pack- Rear Torsion Bars
M/T Big Block Chevy Parts Pack- Timing cover
AFX PARTS PACK- Head light block outs, Gas Cap, Balancer/Timing pulley, Steering Unit
FUNNY CAR PARTS PACK- Fire Extinguisher, Parachute Asst. Pack- Parachute

Scratch built features:
Trim around grill, hood & trunk supports, window trim supports-(on windshield, top of side windows & rear window),
Interior tin panels, Inner door panels, roll bars, steering rods, Sq. Tube chassis & frame, dog house
engine surround,
dog house cowls, Enderle Manifold (w/Ram Tubes), "Art Carr" push button transmission tube, Inner frame rails,
front & rear shocks, wheelie bar & wheelie bar shock, anti-sway bar, all mounts on rear end, head light risers,
bracket with parachute pull & fuel shut off levers, parachute cable bracket, brake lines, fuel lines & air shock lines.

Donor parts:
Built from 2 amt/ertl '69 Covair model kits (one kit to save the body and another kit to save the hood & cowl)
A Revell Malibu S/S Pro Street - Engine, heads, oil filter, starter & transmission
Revell Miss Deal F/C - a section of Interior floor with tranny tunnel.
Protech - Photo-etch nuts & bolts & seat belt buckles
Parts box - gas pedal, brake pedal, oil & temp. Gauge, wheelie wheel, Brake Cylinder,
headers, Apache rear mag wheels & cone shaped tail lights
Amt/Ertl Mustang F/C- Seat & steering wheel
Revell '51 Henry J Gasser - Front tube axle
Polar Lights F/C - Distributor & cap
Johan Funny Car- Fuel Tank

Paint:
Body: White base, H.O.K. white pearl powder mixed in clear.
Purple stripes & side panel - Model Master Purple Pearl.
Yellow stripes & side panel - Model Master Turn Signal metallic (with gold pearl powder added).
Chassis: Rust-All Treatment - mild weathering
Interior: Zolatone style splatter paint was done by hand using "Americana" Paints.

Decals: Slixx


 

Gene Snow's
RAMBUNCTIOUS
1965/66 Dodge Dart Funny Car

Built by: Scott Kapellusch

Speed City Resin Model # SC-29
1966 DART LONG NOSE AWB FUNNY CAR

One of my favorite drag cars of all time and one of the reasons I started Speed City.
To be able to build an accurate replica of this model was a 7 year journey and took 5 master models
to make before I could even attempt to build the model you see here.

Modifications to resin model:
Besides making the original master for this '66 Long Nose Dart Funny Car model (shown on the "In progress" Page 3).....
To make this particular Gene Snow Rambunctious Dart:
"Patch Panels" were installed (using Speed City instructions), all window trim removed, cowl vents filled,
door hinge inner panels, grill and modified front bumper molded to the nose, door handles removed, gas cap filled,
rear valance removed and front clip was re-cut and separated from body.

Speed City Parts added:
Front frame clip from '66 Barracuda Long Nose F/C
Goodyear Blue Streak 16" Slicks
Goodyear Blue Streak *Funny Car* Skinny Front Tires
American Racing 15" Front Mag Wheels (with Inner Rims)
Halibrand (shallow dish) 16" Rear Mag Wheels
Inner Rims (shallow dish)
Hemi Hilborn Injection Manifold
FUNNY CAR PARTS PACK- Disk Brakes, Balancer Pulley & Mallory Super Coil.
AFX PARTS PACK- Cooler Can, Timing Cover & Gas Cap.
'65 Dart AFX- Rear Bumper & Tail Lights
Parachute (from Parachute Parts Pack)
Wheelie Bars

Scratch built added features:
Halibrand (shallow dish) Mag wheels, Goodyear "blue streak" skinny front tires, roll bar, head rest & padding,
Art Carr push button console & levers, steering rods, brake pedal, gas pedal, accelerator box, front spoiler, seat belts,
front tube axle, spindles, tie rod, shocks, control arms, front axles (made from small nails), square tube chassis rails,
ladder bars, motor mounts, rear end blocks, parachute pull, parachute lines, fuel line couplings, brake cylinder,
brake lines, cooler can & lines, flip front end hinge- (using Speed City instructions), cooler can.

Donor parts:
Polar Lights F/C Hemi engine, heads, valve covers, transmission, oil filter & distributor.
*Revell MISS DEAL F/C- Headers.
AMT Rat Packer Inj. stacks (cut down to 7"), fuel tank & steering wheel.
MPC Mustang Gasser seat. Amt/ertl '66 Charger oil pan. '71 Plymouth Duster rear end & drive train.
Protech photo-etch belt buckles, nuts & bolts & Model Master hood pins.

Paint:
Metallic base, Testors Dusty Rose Pearl, H.O.K pearl white stripes and fades,
Testors candy red strips on sail panel & hood.
Chassis: Rust-All Treatment - mild weathering

Decals:
Commissioned "Whoopie Kat Decals" to do the "Rambunctious"decals for this Dart.
I helped with all reference photos and sizing to fit the body. Although the font for the Rambunctious letters were too narrow
When I got them, so I used another set of decals, off-set them on an 45 angle, connecting the black lines and brush painted
the Rambunctious letters in brass metallizer. Whoopie Kat "Silver Machine Turn" decals on all interior panels.


 

Charlie Allen's
ATLANTIC FLYER
1965/'66 Dart Funny Car

Built by: Scott Kapellusch

Built from 3- Speed City Resin Models:
Gene Snow Rambunctious Dart (for the Body)
1966 Long Nose Dart F/C (for the Front clip)
Charlie Allen's "Purple Terror" Dart
(for the Chassis, Interior tub, Cowl, Grill, front & rear bumpers & part of rear wheel well).

Speed City Parts added:
Hilborn Bug Catcher
Eaton G.M 14 bolt Rear End
M&H Racemaster Slicks
American Racing 15" Rear Mag Wheels
Inner Rims (shallow dish)
Goodyear Blue Streak *Funny Car* Skinny Front Tires
American Racing 15" Front Mag Wheels (with Inner Rims)
FUNNY CAR PARTS PACK- 3- gauge Cluster on rack, Blower Pulleys, Blower Belt, Idler adjustment arm,
Mallory super coil,  4 Port Injector hat & Oil Filter with adapter.
AFX PARTS PACK- Timing Chain Cover, Fuel Pump, Master Cylinder & Steering Box.
Parachute (from Parachute Parts Pack)
'65 Dart- Rear Bumper

Body modifications:
To do an accurate version of this car, I started with the body of a '65 Dart Gene Snow Rambunctious body,
(since it had all the correct trim pieces). The B-Pillars were removed along with some of the window trim.
A rear Spoiler was made from a coke can. The front portions of the rear wheel wells from a Charlie Allen's
"Purple Terror" Dart were added (because the '65 Dart Rambunctious body has widened wheel wells).
The rear wheel wells were brought back to stock size, but with a cut out from the Charlie Allen "Purple Terror" Dart.
A Speed City '66 Long Nose Dart was needed for the front clip but the clip was shortened 8 scale inches to be 4" longer
than a stock '66 Dodge Dart. The cowl vents were filled in on the '65 Dart body and the hood was re-cut 2"
from the windshield almost half way into the hood and removed from the body. Hood supports were added to the bottom
of the hood and a new hole was cut for the blower. Hood supports were then added to the body of the front clip.
The front of the front wheel wells were re-cut so the wheels could be moved forward.
A new B-Pillar back up strip was added so the windows could be flush mounted.
Semi-hollow door handles were added to the body from a '66 Long Nose Dart. Rear window bracing was added
so the rear window could be flush mounted. The '66 Dart Grill had all the recess' filled in (to resemble a fiber glass grill),
and then the grill and front bumper was molded to the front clip (to resemble a fiber glass unit).

Scratch built added features:
(From Purple Terror Dart- the entire '66 Dart front clip- By adding a
scratch built hood, grill, bumpers, tail light moldings, front 1/4 panels & front wheel well moldings,
Front frame, Interior door panels, dog house, cowl, fuel tank support and cast in resin).
(from '65 Rambunctious Dart- Rear bumper chrome trim, bottom of drip rail, rear bumper & gas cap).
front tube straight axle, all steering rods, torsion bar suspension, transmission bracket, widened wheel wells,
front & rear Spoilers, windows (clear & tinted), rear window straps, roll bars, parachute pull loop handle,
Parachute straps, lines and connectors, wheelie bar leaf springs, fuel lines & brake lines.

Donor Parts:
Lindburg '64 Plymouth rear leaf springs.
Polar Lights F/C Hemi engine, headers and transmission.
Protech- Nuts & Bolts, pre wired distributor & Model Master - Hood pins.
Parts Box- Seat, steering wheel, gas pedal, brake pedal, drive train, parachute and wheelie wheels.

Paint:
Top of body painted in Model Master "Dusty Rose Pearl".
Bottom of body painted in Model Master "Arctic Blue Metallic"
(Thinning the paint and letting most the metallic fall to the bottom of the bottle, using only a mild blue metallic).
Interior of front clip: Zolatone style splatter paint was done by hand using "Americana" paints & tooth brush.
Chassis: Rust-All Treatment - mild weathering

Decals:
I commissioned "Whoopie Kat Decals" to do these "Charlie Allen's Atlantic Flyer" decals for this model.
I helped with design and sizing on this decal sheet.


 

1966 DODGE DART G/T - SIX

Built by: Scott Kapellusch

Speed City Resin Model # SC-9
1966 STOCK DODGE DART


Speed City Parts added:
Goodyear Blue Streak *Funny Car* front racing tires (resembles 14" Tires) with hand painted white lines.

Modifications to resin model:
Created the original master model... Starting with a Speed City 1965 Dodge Dart AFX AWB Funny Car,
then a Charlie Allen "PURPLE TERROR" Dart then and converting that into a Stock '66 Dart by adding:
New grill, head lights, F&R bumpers, F&R marker lights, hood (and moldings), front 1/4 panels, front wheel well moldings,
B-pillars, side window trim, sail panel trim, antenna mount, gas cap, rear trunk valance, tail lights, re-designed interior tub,
package tray, dashboard, and chassis from a '66 Ply Valiant and added Lindburg Dodge 330 windshield wipers to body
and had it all cast in resin.

G/T conversion features added:
G/T style roof trim (using .010 X .020 sq. strip), front 1/4 panel trim & badges, door trim, rocker panel trim,
G/T style trunk valance, B-pillar "window trim", door locks, steering wheel top ring, glass from K&S clear plastic,
tail pipe, hub cap (center caps).

Scratch built features added to the build:
Chassis wheel wells & lower front splash pan were extended with Plastic sheet.
Promo letters removed from chassis and screw holes filled, door locks, antenna, wing window hinges,
window glass from K&S .010 clear plastic.

Donor Parts:
Hubcaps from MPC 1967 Toronado, (reworked to look like '66 Dart hubcaps),
MPC '66 Charger side mirrors & rear view mirror, photo-etch license plates by Model Master, parts box wheel backs.

Paint:
Plasti-coat sandable primer, Plasti-coat white top, original paint color by:
Paint Scratch.com 1966 Pale Med. Turquoise Poly RR-1

Decals:
Commissioned "Keith Marks Decals" to do the decals for this Dart.
Decals used: G/T badges on the sail panel, DART letters on the rear 1/4 panels, DODGE letters on trunk valence and hood.

Dodge Dealer plates (2- sets) - Protech

This model took FAST ON THE STREET (a street machine class) at the Wally Parks N.H.R.A. Motorsports Museum
"SPIRIT OF SPEED" Model Contest on Nov 8 2015


 

STONE, WOODS & COOK
DARK HORSE 2
'66 Long Nose AWB Mustang Funny Car

Built by: Jim Polli

Speed City Resin Model # SC-17
'66 LONG NOSE AWB MUSTANG FUNNY CAR

Speed City Parts added:
392 Hemi Engine
FUNNY CAR PARTS PACK- Blower Pulleys, Blower Belt.
Cragar (zero offset) front mag wheels

Halibrand (deep dish) rear mag wheels
Goodyear Blue Streak *Funny Car* front racing tires

Body modifications:
Front clip was seperated from body.

Scratch built features:
Front part of frame rails, front Suspension & axle, rear window straps, roll bars & down tubes.

Donor parts:
Polar Lights F/C chassis, slicks & moon tank.
AMT Parts Pack transmission, '41 Willys Parachute, '33 Willys rear end,
Amt/Ertl '67 Mustang GT grill Insert & rear Bumper.

Paint: Chrysler Dealer - Hydro Blue Pearl #E06102646AA

Decals: Slixx


 

Bob Tullius'
Trans-Am racer #44
1966 Dodge Dart



Built by: Lars-Olof Gustavsson
SWEDEN

Speed City Resin Model #SC-9
1966 STOCK DODGE DART

Scratch built features:
Roll cage
.

Donor parts:
Jo-Han Sox & Martin Cuda chassis, Dodge Magnum 500 wheels, Goodyear polyglass GT tires

Paint:
Zero Paint  Brilliant White

Decals:
Homemade from my friend Karl Arlt


 

Don Prudhomme's
HOT WHEELS SNAKE II
'72 CUDA FUNNY CAR



Built by: Doug Schultz

Speed City Resin Model #SC-23
1970 /'74 CUDA FUNNY CAR


Scratch built features:
IFS coil over front suspension, lengthened chassis for the IFS,Steering linkage,
fuel cell, side foot wells on chassis, Interior tin work to match foot wells.

Donor parts:
Revell Gene Snow Vega FC for the chassis
Revell Charger FC for the longer headers
MPC Blower Drive

Decals:
Chuck Boerner


 

Larry Reyes
KING FISH
'67 Barracuda Flip-Top Funny Car

Built by: Jim Polli

Speed City Resin Model #SC-53
1967-'68 BARRACUDA FUNNY CAR

Speed City parts used:
Goodyear "Blue Streak" 15" Slicks

Donor Kit:
Polar LIghts Barracuda F/C (shortened the chassis)

Paint:
Tamiya White & Racing Blue

Decals:
PoleKat


 

Cecil Yother's
MELROSE MISSILE
1965 Plymouth Topless Roadster AFX

Built by: Virgil Stanbary

Speed City Resin Model #SC-36
1965 PLYMOUTH TOPLESS A/FX ROADSTER

Speed City parts added:
Goodyear *Funny car* Skinny Front Tires
American Racing 15" Front Mag Wheels (with Inner Rims)
AFX Drag Slicks

Reversed Halibrand Rear Mags
Hemi Hilborn Intake

Donor parts:
Lindberg '64 Dodge- 426 Hemi, headers, interior, front & rear suspension.
Parts Box- Seat, steering wheel, shifter.

Scratch built features:
Roll cage, wheelie bars, front & rear spoilers.

Paint:
Dupli-color lacquer Polar White and Bahama blue metallic.

Decals:
Whoopie Kat


 

Candies & Hughes
JAKES SPEED EQUIPMENT
1965 Plymouth Sedan AFX

Built by: Doug Schultz

Speed City Resin Model #SC-33
1965 PLYMOUTH SEDAN A/FX

Speed City parts added:
Front Leaf Springs
Hemi Hilborn Intake

15" Injector stacks

Donor parts:
Lindberg '64 Dodge- 426 Hemi engine, transmission, headers, A-100 bucket seat.
 Polar lights: Drive line, chute, fuel tank.
Monogram '56 Chevy- Rear springs.

Scratch built features:
Roll cage, wheelie bars, chassis traction link cross member, transmission mount,
motor mounts, steering linkage, fender/fuel tank mounts, firewall, front straight axle (using Speed City instructions) .

Paint:
Rust-Oleum Gloss Apple Red and urethane clear.

Decals:

Billygooche


Models shown are not for sale

PAGE ( 1 )

PAGE ( 2 )

PAGE ( 3 )

PAGE ( 4 )