"CHASSIS PARTS"
* All items are 1/25 Scale *
This was
designed to replace those AMT/ERTL- MODEL KING incorrect round tube chassis'
This chassis is also kicked up to lower the front stance of the body and stretched to fit most bodies.
Your choice of shocks (and or) springs can raise or lower chassis to your liking.
Will
fit almost any model car, with minimal work.
This
item was semi-scratch built by ....... NOT a copied kit part !
This
Parts Pack comes with: 5 sets of Front Leaf Springs, including a set of 1/4 elliptic Springs !
Talking with some of our customers, we all realized
we're all running out of front leaf springs for our builds,
so we took the best springs we could find and altered them to have better
mounts for the frame and axle.
This
Parts Pack comes with:
1. (Upper left) Universal Leaf Springs w/ shock mounts
*Can be used on almost any drag car that requires leaf springs*
2. (Upper right) Ford Leaf Springs w/ shock mounts
*Can be used for almost any Ford that requires leaf springs*
3. (Lower left) Torsion Bars
*Can be used with leaf spring or G.M. suspension*
4. (Lower right) G.M. Control Arms w/ shock mounts
*Can be used on Pontiac, Olds's, Buick and Chevy*
5. (Lower far right) Coil Spring Mounts
*Can be used on any axle with Coil Springs*
*
Can be mounted to front or rear of axle*
This item was semi-scratch built by ...... NOT a copied kit part !
We came up with the most most desired Rear-Ends for Drag Racing and Street Machines and
included Brake Drums (designed by Ron Ramsay) and Backing Plates with each package.
The great thing about these new Rear-Ends, is that instead of a solid wheel back,
you can see through the mag wheel like you would on a full scale car and using a metal axle; they can roll !
If the mag wheel you want to use doesn't have a mounting hub for a metal axle,
it can be cut off from another wheel and glued to your mag wheel of choice.
To extend your axels; use Evergreen 1/8" .125 Dia. Hollow Plasic Tube.
Parts include: 2 -Hollow Axle half's, 2-Backing Plates & 2-Brake Drums.
From 1957 to '74 the Chrysler 8¾-inch has proven itself as a durable racing performance axle
from the 60's through the '70's.
Designed to have rolling wheels !
*Parts shown have been painted*
This
item was semi-scratch built by ...... NOT a copied kit part !
Parts include: 2-Hollow Axle half's, 2-Backing Plates & 2-Brake Drums.
During the super car sixties this axle was beneath all Chrysler passenger cars equipped with the
Street Hemi or 440 wedge and a manual transmission.
Since then, racers of every type have latched onto the Dana and its huge 9.75-inch ring gear.
Used on the Flip-Top Funny Cars through the 60's & 70's
Designed to have rolling wheels !
*Parts shown have been painted*
This
item was semi-scratch built by ...... NOT a copied kit part !
Parts include: 2-Hollow Axle half's, 2-Backing Plates & 2-Brake Drums.
From 1957 - '64 these B.O.P. rear ends had a well-deserved reputation for toughness and reliability,
that’s why they were found under so many hot rods on the drag strip and the street.
Designed to have rolling wheels !
*Parts shown have been painted*
This
item was semi-scratch built by ...... NOT a copied kit part !
Parts include: 2-Hollow Axle half's, 2-Backing Plates & 2-Brake Drums.
The Eaton 14-bolt axle was used from the '50s to the '70s.
Mainly used on trucks, this was a strong rear end and was used on a lot of drag cars.
A Gassers favorite !
Designed to have rolling wheels !
*Parts shown have been painted*
This item was semi-scratch built by ......
NOT a copied kit part !
Parts include: 2-Hollow Axle half's, 2-Backing Plates & 2-Brake Drums.
The most popular rear end used is no doubt the FORD 9 inch !
it is used by Street Rodders and Drag Racers alike because of it's light weight and strength,
regardless of what brand of car the axle is going in.
Even the GM boys utilized the Ford 9 inch..... even though they hate to admit it.
By far one of the best, Ford used the axle from 1957 until the late '80’s in cars and trucks.
*You may need to shorten the axle -or- add plastic tube to make it a wider wheel base,
depending on the tire or slick your using* (Keep in mind, this axle is staggered).
Designed to have rolling wheels !
*Parts shown have been painted*
This item was semi-scratch built by ...... NOT a copied kit part !