WHEN YOU DEMAND HIGH QUALITY AND ACCURACY, GO WITH........ SPEED CITY !
"MISC. PARTS"
* All items are 1/25 Scale *
* All items are white resin *
 |
DRAG RACING DRIVER FIGURE #1
1/25 scale
* AFX - GASSER - SUPER STOCK - WHEELSTANDERS *
#SC-118 ....... $10.00
* This Figure comes with: Open Face, Bare Hands, Penny Loafer Shoes, Standard Helmet & Fire Suit.
* Possable Figure will fit into any seat with our "Ball & Socket"- hip and torso.
* Separate "Bent & Extended Arms" can be moved or swapped to fit steering wheel, stick shift, waving, etc.
* Legs or feet can be slightly re-angled by heating parts and bent to fit location needs.
Flash on the seam lines can be cleaned up by scraping with a razor blade and finish with a small round jewelers file.
When using the "Extended Arms", always remove excess from the back of the arm to position them.
Extra length was left on the extended arm, but keep the arm pit in tact as it is the correct length of the arm !
Instructions if you need to reposition legs or feet.
IT'S TIME TO PUT A DRIVER IN YOUR SEAT !
To see how the master was created, check out the "IN PROGRESS" page.
This
item was scratch built by 
...... NOT a copied kit part !
DRAG RACING DRIVER FIGURE #2
1/25 scale
* ALTERED - DRAGSTER - AWB FUNNY CAR - FLIP-TOP F/C *
* Drag Racing Figure with: Full Face Mask, Gloves, Boots, Helmet (with Visor) & Fire Suit.
* Possable Figure will fit into any seat with our "Ball & Socket" - hip and torso.
* Separate Bent & Extended Arms can be moved or swapped to fit sterring wheel, stick shift, waving, etc.
* Legs or feet can be re-angled by heating parts and bent to fit location needs.
#SC-102 ....... $10.00
Flash on the part lines can be cleaned up by scraping with a razor blade and finish with a small round jewlers file.
When using the "Extended Arms", always remove excess from the back of the arm to position them.
Extra length was left on the extended arm, but keep the arm pit in tact as it is the correct length of the arm !
you can also remove the cowl and make the fire suit look like the cowl is tucked in and the suit is zipped up.
Visor on helmet can be removed by filing down the visor tip and making it part of the helmet bead.
Instructions if you need to reposition legs or feet.
"NEW & IMPROVED HEAD"
Now comes with a new head that has a corrected helmet, extended breathers,
a longer nose, longer face, deeper recess in goggles & no outside goggle strap.
A goggle strap can be made easy with tape.
This
item was scratch built by ...... NOT a copied kit part !
A-100 LIGHTWEIGHT SUPER STOCK SEATS
#SC - 82 ........ 8.50
These seats have a 2-piece look to resemble a top and bottom.
Comes with correct piping around all the sides of the seat
Mounting Bracket Holes are only .010" thick and can be easily drilled out.
*If using these seats on our '65 Ply & Dodge AFX cars, you will need to cut out the floor from the interior tub*
This
item was semi-scratch built by ...... NOT a copied kit part !
TANK ENDS & CAPS
*Assortment Pack*
#SC-121....... $6.00
Comes with: 3 different sets of Tank Ends - 2 Flipper Caps - 1 Spinner Cap
Use Evergreen 5/16" Plastic Tube (or) K&S Aluminum Tubing for the 2 smaller tanks.
Use Evergreen 3/8" Plastic Tube for the larger tank.
Using your own tubing...... You can make each tank to the length you need.
For a polished aluminum look, use a "CHROME" Spray Paint.
Are you sick of robbing kits just to get a fuel or water tank?..... Now you can have all the fuel or water tanks you need !
GAS & BRAKE PEDALS
*Assortment Pack*
#SC-113 .......... $6.50
Parts include: Dash Mounted Gas & Brake Pedal, 3- Flat Grid Pedals & 3- Foot Shaped Grid pedals.
The Gas & Brake Pedals are perfect for the automatic AFX Cars and Early automatic Funny Cars.
The brake pedal could also be cut in half and the other half can be used for a clutch pedal if desired.
PARACHUTES
*Assortment Pack*
#SC-56 ....... $10.00
10 of the best looking parachutes ever made !
These parachute's have more detail than most others, including:
3 - that are matching sets (on left) for those "Top Fuel Funnies" that
require Dual chutes.
Much more detailed than the Polar Lights F/C chutes, these could be a welcome replacement.
For a realistic look.... After spraying flat black, these chutes can be "dry brushed".
Using "Americana" or "DELTA Cream Coat" Neutral Gray, Found at most craft stores.
DECAL'S
1966 
URST HAIRY OLDS FUNNY CAR
1/25 DECAL
#SC-006 ........ $14.00
These new "laser printed" decals have been designed to fit the AMT '66 OLDS 442 W30 1/25 scale body.
All the correct lettering, sponsors, hood pins, hub caps,
442 badges and even the MOON fuel tank tags are included.
Also included: are some black "over spray fade away" decals to add with your taped off black stripes.
Another "BONUS DECAL" will be for the Monogram "IT'S THE HARIEST" trunk decal as it was never included with the kit.
FYI- The Monogram model is based on a '67 Olds with a lowered body and radiused wheel wells.
To build this version of the Hurst Hairy Olds;
click the Hurst logo for the "HOW TO" project page.
These decals are a 2 step process in which you'll need to put down a white base decal first
and then apply the color " laser printed decal" on top of the white.
If ordering decal(s) only, contact me at: skmodeler@sbcglobal.net to invoice you with a lower shipping cost.
Artwork, design & pattern layout: Keven Gomske. Concept, direction, sizing & print outsource: Scott Kapellusch.
CHROME HOOD PINS
DECAL
(set of 8)
#SC-005 ........ $3.00
Cut around each hood pin with hobby knife or scissors.
If using a real pin, apply decal after holes are drilled. and poke hole through decal.
If ordering decal(s) only, contact me at: skmodeler@sbcglobal.net to invoice you with a lower shipping cost.
Mr. UNSWITCHABLE GTO
DECAL
#SC-003 ........ $10.00
OUT OF PRODUCTION !
Our decal sheet has been designed to have all the correct lettering, sponsors, chrome Pontiac & GTO emblems.
We also included the "RAM HORNS" & "MR. UNSWITCHABLE" art work that was on the helmet to fit our new Driver Figure.
Guaranteed to be the only correct Mr. Unswitchable decal ever made !
Here's the original mpc model with incorrect decals.
TEMPTATION PLYMOUTH AFX
DECAL
#SC-004 ........ $10.00
OUT OF PRODUCTION !
These new decals have been designed to have all the correct sponsor sizes, hood pin decals
and
red pin striping around the metallic gold Temptation letters, just as they should be !
Guaranteed to be the only correct TEMPTATION decal ever made !
1/64" red pin strip can be found at: ModelExpo
Lil' SCREAMER
DECAL
#SC-001 ...... $10.00
OUT OF PRODUCTION !
Enough sponsors for almost every version of the Lil' Screamer.
The blue fade-away decals can be sprayed with a dusting of white or blue pearl,
this will give the appearance of custom pearl painted fade-away's.
Then add the sponsor decals of your choice and top coat with gloss clear.
WANTED & DESPERETLY NEEDED
We are trying to locate an Alps MD-1000, MD-1300, MD-5000, or MD-5500 MODEL.
(must have printer cable and power cable)
Will will also take any left over ink cartridges you may have.
Also needed is a 32-bit computer with windows 8 or better to run the printer.
Please help !
All rights reserved. Do not copy any Speed City Resin bodies or parts without permission and consent.