WHEN YOU DEMAND HIGH QUALITY AND ACCURACY, GO WITH........ SPEED CITY !
"TIRES & SLICKS"
* All items are 1/25 Scale *
Cast in Black Rubber !
 |
M&H RACEMASTER 16" DRAG SLICKS
#SC-98 ....... $ 8.50
OUT OF STOCK, DO NOT ORDER !
Our (Deep Dish & Shallow Dish) "INNER RIMS" will fit these too.
This
item was semi-scratch built by 
......
NOT a copied kit part !
GOODYEAR "BLUE STREAK" 16" DRAG SLICKS
#SC-99 ........ $8.50
OUT OF STOCK, DO NOT ORDER !
These slicks are designed to except a 16" mag wheel and a standard 15" wheel back (or Inner Rim).
Lettered on both sides - correct 12.50" width in scale.
16" Slicks & Mag Wheels were preferred by most drag racers for better performance !
These slicks will make a great replacement for the Polar Lights Funny Cars,
since the flopper style Funny Cars from 1968 ran 16" Slicks & Mag Wheels.
You'll be amazed at how much more accurate these 16" Slicks & Mag Wheels look on your model !
Our (Deep Dish & Shallow Dish) "INNER RIMS" will fit these too.
This
item was semi-scratch built by ...... NOT a copied kit part !
GOODYEAR "BLUE STREAK" 15" DRAG SLICKS
#SC - 73 ...... $8.50
Fits all standard size 15" mag wheels.
12.50" wide in scale.
Our (Deep Dish & Shallow Dish) "INNER RIMS" will fit these slicks.
M&H PIE CRUST 15" DRAG SLICKS
#SC-71 ....... $8.50
OUT OF STOCK, DO NOT ORDER !
Note: The Revell
Pie Crust Slicks are 16" (rim size) and will
only fit other Revell 16" mag wheels.
These slicks have a standard 15" rim size and are 10.50" wide in scale.
This opens up many new Mag Wheel & Tire combinations for us !
Our (Deep Dish & Shallow Dish) "INNER RIMS" will fit these too.
This
item was semi-scratch built by ......
NOT a copied kit part !
FIRESTONE DRAG 500 15" SLICKS
#SC- 52 ....... $8.50
These are not re-cast Johan slicks!
These are the only accurate "FIRESTONE DRAG 500" slicks ever made.
Lettered on both sides with correct diameter size and side wall detail. 10.50" wide in scale.
Will fit a stock wheel well on any Super Stock Barracuda, Charger, Dart, Road Runner, Etc.
Please note: Revell Keystones will not fit our Drag 500 Slicks
as Revell mags are 16"
Check out our new Speed City Resin "Keystone 15" Mag Wheels" to fit these Drag
500's.
* Mastered by Ron Ramsey & Scott Kapellusch *
To see how the master was created, check out the "IN PROGRESS" page.
This
item was semi-scratch built by ...... NOT a copied kit part !
7" CHEATER SLICKS
M&H Racemaster Super Sport 15"
OUT OF STOCK, DO NOT ORDER !
7" wide cheater slicks were the ONLY LEGAL TIRE for Super Stock racing from 1962 - 1967.
7x15" Cheater Slicks are the only accurate NHRA approved slick to use for the S/S (Super Stock class).
Cars like the.... '64 Ramchargers Dodge , Color Me Gone, Thunderbolts, Bel Airs (Old Reliable), GTO's,
(Passionate Poncho), Bill "Grumpy" Jenkins Nova, Etc... Had to run Cheater Slicks !
These can also be used on Street Machines, Rat Rods, Hot Rods, Etc.
To see how the master was created, check out the "IN PROGRESS" page.
This item was semi-scratch built by ...... NOT a copied kit part !
9" CHEATER SLICKS
M&H Racemaster Super Sport 15"
#SC-59 ....... $8.50
9" wide
Cheater Slicks are the only accurate NHRA approved Slick to use for any Modified Production Class.
These can also be used on Street Machines, Rat Rods, Hot Rods, Etc.
To see how the master was created, check out the "IN PROGRESS" page.
This item was semi-scratch built by ...... NOT a copied kit part !
GOODYEAR 15" DRAG SLICKS
#SC- 43...... $8.50
OUT OF STOCK, DO NOT ORDER !
These
were made from the original amt "Super Boss Funny Car" Plastic Slicks........
NOW IN BLACK RUBBER !
These
can replace all the original plastic AMT Chevelle, Tempest, Olds F-85, Chevy II, Mustang & Edsel F/C slicks
Great
looking 12" wide Drag Slicks for any Gasser, Dragster, Altered, A/FX, AWB, early Funny Car or Early Pro Stock.
RACEMASTER DRAGSTER 15" SLICKS
#SC- 44...... $8.50
OUT OF STOCK, DO NOT ORDER !
These were made from the original amt "Super Boss Funny Car" Plastic Slicks........
NOW IN BLACK RUBBER !
These can replace all the original plastic AMT. Corvair, Cyclone, Barracuda & Falcon F/C slicks
Great looking 12" wide Drag Slicks for any Gasser, Dragster, Altered, A/FX, AWB, early Funny Car or Early Pro Stock.
AFX DRAG SLICKS
GOODYEAR "BLUE STREAK" LOW PROFILE
.jpg)
#SC- 45...... $8.50
OUT OF STOCK, DO NOT ORDER !
These 15" Slicks have a Lower Profile than other slicks and will fit when all other slicks are to tall or wide in diameter.
These will also except a 16" mag wheel if you cut out the center rib.
* The perfect 10" Slick for all AFX cars and are period correct for 1965 - '67 Funny Cars*
This item was semi-scratch built by ...... NOT a copied kit part !
"Wrinkle Wall" PIE CRUST 15" DRAG SLICKS
#SC-10 ..... $8.50
OUT OF STOCK, DO NOT ORDER !
The only Wrinkle Wall 12" wide Slicks available that are lettered & wrinkled on both side's !
This item was semi-scratch built by .......
NOT a copied kit part !
*FUNNY CAR*
GOODYEAR BLUE STREAK
Skinny Front Racing Tires
4 X 15 X 25"
#SC - 75 ...... $6.50
These can also be used as "Stock Tires" for 60's Barracuda, Valiant, Chevy Nova, etc.
Or any car that would have ran a 14" tire as these look like a stock 14" (even though they're 15")
The GOODYEAR letters are below the Blue Streak on these tires.
Use a sharp razor knife or a thin blade scissors to remove rubber flash.
To see how the master was created, check out the "IN PROGRESS" page.
This item was semi-scratch built by ...... NOT a copied kit part !
*AFX*
GOODYEAR BLUE STREAK
Skinny Front Racing Tires
4 X 15 X 25"
#SC-37........ $6.50
OUT OF STOCK, DO NOT ORDER !
These are the same size as the *Funny Car* tires,
but these new tires have zig-zag treads and have a taller profile than our *Funny Car* Tires.
The GOODYEAR letters are above the Blue Streak on these tires.
Use a sharp razor knife or a thin blade scissors to remove rubber flash.
This
item was semi-scratch built by ...... NOT a copied kit part !
*SUPER STOCK*
Skinny Front Racing Tires
4 x 15 x 26"
#SC-72 ........ $6.50
OUT OF STOCK, DO NOT ORDER !
Finally, a correct front tire for all AFX and Early Funny Cars !
When the other tires you have seem too big or too small...... then these are the ones you need !
These tires are more flexible than vinyl tires, so you can cut off the tires you currently have
on your model, and these new AFX tires will stretch over your mag wheel with ease.
Heating them will help to put on.
Use a sharp razor knife or a thin blade scissors to remove rubber flash.
To see how the master was created, check out the "IN PROGRESS" page.
This item was semi-scratch built by ...... NOT a copied kit part !
To letter or stripe tires: Use a tooth pick and acrylic craft paint.
To sand the slicks down fast: Use a Dremel Drum Sander.
To dull the side walls: Use #0 Fine Steel Wool or Dull Coat.
All rights reserved. Do not copy any Speed City Resin bodies or parts without permission and consent.